Board logo

Fuel pipe and Brake lines
EasyJimbo - 6/6/09 at 12:25 PM

Hi guys
Can anyone reomend what fuel line I need and where I can get this from? Also I have the delux kit from MK which has brake pipes set in but I guess i will need further brake pipes will I? if so what spec and where is best to get these?
thanks
J

[Edited on 7/6/09 by EasyJimbo]


EasyJimbo - 7/6/09 at 03:57 PM

Anyone?


Staple balls - 7/6/09 at 05:49 PM

Depends what you got in your brake line kit from MK.

Usual fuel line is 8mm copper microbore heating tube + correct marked rubber pipe to suit your engine/fuel of choice.


Hellfire - 7/6/09 at 05:59 PM

You should have enough brake pipe to run your brake lines but it ultimately depends on how/where you route it. If you run out, have a word with MK.

With regards to your fuel line, you're better off measuring the existing fuel fittings on the engine/fuel pump and then getting some copper microbore like Mr Balls says Most good DIY places will sell it. You then need flexible fuel hose to connect each end.

Phil