Can anyone tell me where i can find the trim that can be fitted on top of the side panel edge,with the correct radius for SVA and flexible enough to be formed around the curve of the side panel.

Cheers, John

Thats the horsebox stuff U2U macspeedy for the address and phone number

Aluminum extrusions

someone has asked before where i got the trim for the step bar found it at long last

http://www.eahorsebox.co.uk/pages/mailordercd.html#c

its either c10 or c11



[Edited on 29-1-05 by mangogrooveworkshop]

last I heard MK were selling it

Cheers

Mark

I got mine from MAC1 - ready bent (sort of) to fit whatever kit you're building.

Pete

Thanks for the info lads. I've got a offcut of the MK trim,not sure of the flexibility to go around the bend of the rear of the side panel without distorting? I'll give MAC1 a try.

Cheers ,John.



[Edited on 29/1/05 by Spriggsy]

MK didnt have any when i needed mine,got a couple of pre bent ali pieces from mac1,even came with the nice big rivets too.

Cant remember price but i think it was around £25 a pair.

I'd probably advise against the stuff from east anglia horseboxes.

its cheap, but it shows!

unless you like endless sanding of deep gouges and scratches, stay away. in original form it is definitely not presentation standard.

just a heads up
tom