Board logo

mk headlamp bar
COREdevelopments - 7/1/08 at 08:52 PM

Hey all. can anyone tell me the length of a mk headlamp bar?

thanks

Rob

whitestu - 7/1/08 at 08:55 PM

Not sure but it fits perfectly between my headlamps!

milton - 7/1/08 at 08:57 PM

do you want overall or hole centres
milton

COREdevelopments - 7/1/08 at 09:00 PM

hole centre would be prefered,

thanks

Hellfire - 7/1/08 at 09:02 PM

800mm

Phil

COREdevelopments - 7/1/08 at 09:05 PM

thanks hellfire. and milton
oh and you too whitestu!:

atb

Rob

milton - 7/1/08 at 09:08 PM

mine is 877 O/A and 830 hole centres you takes yer choice

COREdevelopments - 7/1/08 at 09:11 PM

are they both MK? only rough guide in need, thanks for the swift replies guys.

Rob

milton - 7/1/08 at 09:17 PM

Yes mine is I stood and watched him make it
Milton.

Hellfire - 7/1/08 at 09:46 PM

Ours is MK too. Just go for somewhere between the two and you'll be fine.

Phil

omega 24 v6 - 7/1/08 at 10:31 PM

WARNING
As you are building a Luego then you will also need to consider the fact that your headlights can be no more than 400mm from the most extreme outer edge of the vehicle to the edge of the light emitting surface. And as Luego's are supposed to be big wide bad boys it may become an issue for you at a later date.

COREdevelopments - 8/1/08 at 11:10 AM

mine is a luego locost chassis, using locostparts(MNR) wide wishbones, shall measure to see the difference.

thanks
rob