Board logo

R1 tickover?
Major Stare - 4/7/09 at 08:08 PM

Just a quick question....... what should a 2003, R1 tickover be?


mad-butcher - 4/7/09 at 08:49 PM

I like to set any vehicle ticking over at about 900 to 1000 rpm

tony


cloudy - 4/7/09 at 08:56 PM

If it helps book value for gsxr1100 is 1200rpm I think...


smart51 - 4/7/09 at 09:18 PM

98 R1 is 1000-1100. It idled very badly below this.


adithorp - 4/7/09 at 09:33 PM

1000-1100rpm


Major Stare - 4/7/09 at 10:21 PM

Cheers, i'll warm it up again tomorrow and check it.

Seemed a bit low today and the DigiDash wouldnt clear the OPA unless i kept the revs at 1100 - 1200rpm


hobbsy - 4/7/09 at 11:27 PM

Depends what you've got the OPA level set to?

Most bike engines have a very low oil pressure at idle when hot.

I'm talking <10psi.

For that reason mine is just over 1000rpm (I'm a lot happier seeing 10psi or so!)


eccsmk - 4/7/09 at 11:41 PM

that spooky i was adjusting my tick over today and upped it to suit the oil pressure

my zx is now running 1200rpm at tickover

quote:
Originally posted by hobbsy
Depends what you've got the OPA level set to?

Most bike engines have a very low oil pressure at idle when hot.

I'm talking <10psi.

For that reason mine is just over 1000rpm (I'm a lot happier seeing 10psi or so!)


A1 - 5/7/09 at 02:18 PM

for the 03 r1 its 1150
thats what mine is at.