Board logo

Problem solved - must be load on wheels when testing.
Northpole - 15/8/12 at 10:00 PM

Well my friends, thanks for all your replays.

I found our what the problem was. The car was lifted up from the floor and when free-wheeling it made a very unpleasant sounds (for motorhead as myself), I did remove the clutch and it was fine. When on load, i.e. on the ground it was fine.

And my first test run ever on my project was amazing! It is so light and FAST.

maccmike - 15/8/12 at 10:29 PM

good

mad4x4 - 16/8/12 at 06:20 AM

quote:
Originally posted by Northpole
Well my friends, thanks for all your replays.

I found our what the problem was. The car was lifted up from the floor and when free-wheeling it made a very unpleasant sounds (for motorhead as myself), I did remove the clutch and it was fine. When on load, i.e. on the ground it was fine.

And my first test run ever on my project was amazing! It is so light and FAST.



This is a bit cryptic what was causing the problem?

ReMan - 16/8/12 at 07:14 AM

A follow up to this would have been better
http://www.locostbuilders.co.uk/viewthread.php?tid=173516

Keep it tight, folks have been banned for less

Northpole - 16/8/12 at 11:08 AM

quote:
Originally posted by ReMan
A follow up to this would have been better
http://www.locostbuilders.co.uk/viewthread.php?tid=173516

Keep it tight, folks have been banned for less



Thanks for the tip! (I am new here, but I am learning...)
I have made the follow up on that thread.