Board logo

blade no spark
lenny - 17/4/05 at 01:23 PM

Hi all , I got no neg feed from ecu to coils all the rest seem ok but no spark, wot to try next ??


alister667 - 17/4/05 at 01:29 PM

Have a wee read of this thread. Obviously the bit about the fule pump doesn't apply!
http://www.locostbuilders.co.uk/viewthread.php?tid=23886

All the best

Ali


lenny - 17/4/05 at 01:40 PM

pink wire, no resister that is the one ,me dull mode again , back to shed and try Lenny


lenny - 18/4/05 at 12:02 PM

wot size and rateing resister for this mod


ChrisGamlin - 18/4/05 at 12:11 PM

390ohm, not sure on rating but the one I used was only a small one so I assume 1/4w or something?


lenny - 18/4/05 at 12:17 PM

thanks Cris the man at maplins on help at all Lenny