Hi there
I'm just about to make up a cradle for the engine, its a C1 model. I'd be grateful if you could confirm the bolt diameters / lenghts and
where you got them from.
Many thaks
Ian
Hi there
I,m to are building a MK Indy with a zx9 engine, only MK delivered the engine mounts, I will take some pics this evening from the mount and look at
the size bolts i'm gonna use.
Cheers,
Steef
Believe they are identical to the ZX10, in whichcase the bolts at the front are aroun 3" long, the rear ones are a very long bolt, I'd guess
about 10", one of mine had seized in the frame & had to be cut, I replaced it with a length of studding.
All diameters are 10mm