have i got my wires crossed here or am i right in thinking that the barnett clutches are crap, but the springs are good
any advice please

cheers, mark

Ditto Chris's comments. EBC awful- from experience with kevlar plates. Barnett ones mucho better.

In my opinion of course

thats it EBC i knew one of them was a snotter, thank god i asked, cheers chris

[Edited on 11/6/07 by mark.s]

my barnett plates died in about 50kms

the lining came away from the plates!

I have a barnet pressure plate which is just fine. I needed to bolster the springs with washers to give a bit more pressure but its been fine since