Hi,

Who has some pictures of the following items of a ZX-9R engine from 2003:

- Gear linkage
- Propshaft connection

And does somebody got a manual in PDF format of the ZX-9R 2003 which he can e-mail to me?

Thanx in advance.

Sebastian.

try this link for manuals
http://www.bikechatforums.com/viewtopic.php?t=41567ox-a&rls=org.mozilla:en-US<img%20src=images//smilies/shocked.gif%20align=

This is a 98 c1 engine, they are very similar in apperance,

zx9r engine

[Edited on 2/7/07 by roadrunner]

Have a look in my photo archive, older engine , but they haven't changed much.

Al.




Originally posted by Sebastian
Hi,

Who has some pictures of the following items of a ZX-9R engine from 2003:

- Gear linkage
- Propshaft connection

And does somebody got a manual in PDF format of the ZX-9R 2003 which he can e-mail to me?

Thanx in advance.

Sebastian.

This is my linkage, simple, but it works well.

gear linkage
P S , it looks better now it's painted.

[Edited on 2/7/07 by roadrunner]

Roadrunner,

The flange on the picture where you bolt the prop on is this the original kawasaki one which normally holds the sprocket for the chain?

And do the holes align with the ones of the propshaft?
And from what material have you made the spacer to connect them?

Sorry for my english hope you guys understand what iám meaning.

The flange is not standard equipment. You can buy them from here When you have a prop made up you will have to tell them the spacings of the holes on the flange/adaptor.Hope that helps a little

OK, but i see on the picture a gold/bronze flange with a big nut on it and 4 holes, is this the standard one or is this allready a new flange?

Its new.

Hers's part of mine



Gear Link

Andy

This is my gear linkage. I've use a cable instead of rod ends and links etc.



Description

Mine,bracket courtesy of Pathfinder

Thanks guys for all the information so far, it's very helpfull.

where did you guys all get your rose joints from?

Try McGill Motorsports here They've loads, good service too.