Board logo

R1 wiring
cossiebri - 26/2/08 at 05:50 PM

Has anyone got a photo of the wiring going into the regulator/rectifier for the 4xv R1? As i'm not using the original loom need to know what goes where from the 5 pins,i know 3 go to alternator 1 to earth & 1 to main fuse in starter relay.Need to knowwhich ones
cheers

[Edited on 26/2/08 by cossiebri]


smart51 - 26/2/08 at 06:07 PM

on mine, red is 12V, black is ground and the three whites are the 3 phases of the generator.


cossiebri - 26/2/08 at 06:08 PM

But where are they on the plug that goes to the reg/rectifier? As i haven't got the loom just the main reg/rect unit with a 5 pin plug on it

[Edited on 26/2/08 by cossiebri]


locoR1 - 30/3/08 at 10:37 AM

Here you go all three whites on the bottom three connections red to the right and black to the left depending on which way you look at it see photo!
And nothing connected to the top center.


[img][/img]

Dave.....


cossiebri - 31/3/08 at 03:20 PM

Cheers for that dave, you are a star


locoR1 - 31/3/08 at 03:26 PM

Your most welcome