Board logo

Gone and done it now...
PeterW - 10/3/08 at 08:26 PM

Yep...




Found the wallet....




And bought a Blade engine.....




Just need to fit it, wire it, plumb it, then do the rest of the dash, the body and the interior and......


Anyone got some good advice on fitting an 893 to a Tiger Cat...??


Cheers

Pete


matt.c - 10/3/08 at 08:30 PM

Get the car on a big diet!!!


PeterW - 10/3/08 at 08:33 PM

Yep....

Anything non essential is going !!

Carpets and curtains to start with...

And it'll be getting some serious surgery in other places...

Pete


matt.c - 10/3/08 at 08:35 PM

Throw away all the bodywork and fit Real carbon fibre and very very light wheels. Then you will have a very cool tiger!!

Go and buy another blade and do this!!
Image deleted by owner



[Edited on 10/3/08 by matt.c]


IDONTBELEIVEIT - 10/3/08 at 09:24 PM

nice aye!!!!!
look like gixer thou engines to me


[Edited on 10/3/08 by IDONTBELEIVEIT]

[Edited on 10/3/08 by IDONTBELEIVEIT] Rescued attachment 139-3980_img.jpg
Rescued attachment 139-3980_img.jpg


Paul TigerB6 - 10/3/08 at 09:26 PM

Have to dump the lardy Sierra rear suspension next. Someone on the Tiger forum did this and saved loads of weight. I'll have a look for the link if you are interested


PeterW - 10/3/08 at 10:32 PM

quote:
Originally posted by Paul TigerB6
Have to dump the lardy Sierra rear suspension next. Someone on the Tiger forum did this and saved loads of weight. I'll have a look for the link if you are interested


Wasn;t it Oliwb...??

Pete


Paul TigerB6 - 10/3/08 at 11:09 PM

quote:
Originally posted by PeterW

Wasn;t it Oliwb...??

Pete


It was indeed - thread was entitled "cutting up a cat"

linky

[Edited on 10/3/08 by Paul TigerB6]


PeterW - 11/3/08 at 01:38 PM

Hmmm...

uses a GTS dedion tube...

Do I want to start that conversation...??

Pete