hi all
has anybody got a diagram of a cut down loom?
not wanting to keep all the light rubbish?
also the guy i got it from has cut the speaker on the datatool alarm so ididnt know the alarm was going off all the time

so have to try to remove it.
cut the loom open (parts of it)
its been put in right,loads of false trace wires, but still not figured it out yet !
hence cut the loom up

[Edited on 16/3/08 by ch1ll1]

I never got around to drwaing a modified diagram but you can't go far wrong if you follow this http://www.robcollingridge.com/kitcar/design/engine/electrics.html

adrian

What year? Have notes all over my Haynes and could walk you through it.

Here's a simplified diagram that I did a couple of years ago. I some point I noticed that there was a bit missing but I can't remember what. No promises that there aren't other mistakes.

link to earlier post on the subject

I cut mine off four inches from the ECU and took it from there. Wired the ignition just like a car.

sorted now
started first time !
hate those black wires!