Hi all.

I need this info for a 2003 R1, but I was not able to find it anywhere.
I'm thinking about turboing mine, and I'd like to know if the stock injectors (+ PC III USB) are up to the job with something like 5 or 6 psi of boost...

Cheers,
Joao

i have the same problem i couldn't find the flow rate anywhere, i needed it for my megasquirt, i asked the guys on here and we came up with a figure of 200 cc/min, but when we put that in megasquirt and did a little fine turning, it was more like 220-230cc/min,

dont know whether this will help or not really?

all the best

Cheers mate!!!

That is quite helpfull!! It looks quite near, but a litlle bit low...

The R1 produces like 160 hp or so. For such power, according to Megasquirt here you'll need a bit more than 250 cc/min - or am I reading it wrong?!

Joao

Guys

I can't remember where but I believe I found that mine were 220 cc/min (2005 5VY).

Regards

Wyn

[Edited on 18/7/08 by lsdweb]