Does anyone have any suggestions for a cover to keep mr SVA man happy on my harness top mounts (Indy, if it makes a difference).

I had been hoping use some plastics trims from the classic mini, but all stock of these seems to be sold out and I just don't have time to scrat about at breakers yards in the hope of finding 4 decent trims.

Hi

dont know what other people have done but i got away with mine left as they were just covered the bolt heads up and they were happy at Beverley sva but that was just me that i know of

Mark

[Edited on 24/1/09 by myeates]

Sounds nice and simple - I'll be going to Beverley myself too.

Probably worth covering up somehow though, just to be sure as I'd be pretty annoyed at myself for failing because of this (when there are sooooooo may other bits to fail on that are harder to sort!)

I put a nut cap on the bolt and some small edge trim round the bracket. Tester just lifted the cap to check the bolt strength. Passed no probs.

edge trim is your answer i think, nice and easy. better to sure, the only reason i didnt cover was because i forgot about them before