Board logo

trim under dash area
evo3500 - 24/5/05 at 09:57 PM

for sva do you have to have the area above your legs / under dash paneled in or not also what radius is required on lower edge of dash.

Thanks Simon.


tri - 24/5/05 at 10:04 PM

of what i understand you do not need to put anything in there

Tri


donut - 24/5/05 at 11:11 PM

I didn't and it was ok. I think as long as theres nothing hanging and everything is tidy and secure it should be ok.

[Edited on 24/5/05 by donut]


Mike S - 25/5/05 at 07:44 AM

Simon

According to SVA Manual, if dash is padded bottom radius must be 5mm minimum. If unpadded, then radius must be 19mm minimum.

Cheers

Mike


David Jenkins - 25/5/05 at 07:46 AM

And if you pad it, you shouldn't be able to feel the edge underneath if you push the padding hard with your thumb.

David


evo3500 - 25/5/05 at 07:59 PM

Thanks for the advice will let you know how i get on after sva on tuesday .

Thanks Simon