cars nearly ready for the road, but im having the tracking done at a mates with his guages, im wandering what it should read toe in/out wise, or whats best setup wise, thanks alastair

It depends on your car...

but generally:

Front toe in 0-1 degrees
Rear parallel

Steve

It depends on your car...

but generally:

Front toe in 0-1 degrees
Rear parallel (if it's an Indy Mk1 this is important as the nearside rear toe's out about 3 degrees)

Steve

I recommend slight toe in of the rears too as parallel will cause slight drift in straight lines. At least 0.25 on each wheel

cheers guys