Hi I've been to my local motor factors recently who are normally very good. I wanted a pair of new / recon calipers for my build. I am running cortina uprights but they say that the calipers I have taken in to them are not cortina as they are A.t.e cal;ipers and not Girling.

They are only 2 pot and off the top of my head the pistons are about 43 mm diameter.

Can anone verify / shed any light on why I have 2 sets of calipers with a.t.e. markings on, were these fitted to some other ford, can't think what as the hubs do have top & bottom ball joints as per the cortina.

Any thoughts ?...................


RD

not sure if this will help but you could have a look on brakesinternational or rally designs sites see what they list ?

brakes int


RD

[Edited on 20/7/09 by eccsmk]

photos of them might help?

I will post some pics tomorrow.....
Thanks

Cortina are approx 2" bore --- 52mm

Sorry about the size ....... working on it
RD

Right I think thats OK
As you can see it has A.t.e. on the side

RD





[Edited on 21/7/09 by rallyingden]

[Edited on 21/7/09 by rallyingden]

Motor factor come up trumps

They are Capri

RD