I have lost the keys for my hub caps (actually I think some kids stole them I as stupidly left them in the car door pockets in full view).
https://photos.app.goo.gl/sCZLWwsAKLonIRx13
Any idea where I can get replacements... looked on the web and cant see anything. Are these std fitting and does anything else do the job off say another make? I measured the thread OD and it is just over 7.5mm -which does not sound like anything "normal" to me?
Alex

They're also used on renaults and vauxhalls and normally are 8mm thread. An 8mm pan or cheese head torx bolt is a good replacement if you don't want to replace with security bolts.
Here's some new vauxhall ones:
Vauxhall ALLOY WHEEL CENTRE CAP LOCKING BOLT SET - LOCK - NEW - 90495549

Dave

quote:

---

Originally posted by obfripper
They're also used on renaults and vauxhalls and normally are 8mm thread. An 8mm pan or cheese head torx bolt is a good replacement if you don't want to replace with security bolts.
Here's some new vauxhall ones:
Vauxhall ALLOY WHEEL CENTRE CAP LOCKING BOLT SET - LOCK - NEW - 90495549

Dave

---

agree they are very 90's but they suit the car (a Ginetta) which is very 90's :-)..

I can get them un-done with a couple of small screw drivers and pliers but want something more practical for day to day use - the wheels come off quite often!

I will have a look at the vaux / renault ones.. I might need a longer thread. otherwise will try some st steel m/c screws...
Thanks