Board logo

Wheres the.....
Danozeman - 9/6/03 at 05:32 PM

Wheres the best and cheapest place to get the lower ball joints for the sierra hub usage of....

Ive found that lolocost is the cheapest for the top ball joint compared to all parts places even with my trade discount but they dont do the bottom balls.

James - 10/6/03 at 04:36 PM

quote:
Originally posted by Danozeman
Wheres the best and cheapest place to get the lower ball joints for the sierra hub usage of....

Ive found that lolocost is the cheapest for the top ball joint compared to all parts places even with my trade discount but they dont do the bottom balls.


The Sierra hub doesn't fit the Cortina BJ that lolocost sell but it doesn't fit anything else much either!
I believe that Astra BJs may fit the Sierra but you'd need to take the hub down to your motor factors to check.

What those of us who're using sierra stuff do is use Cortina (or Maxi) BJs and get the hole bored out to fit.
This is what MK do.
MK will do it for you for £7 per side.

HTH,

James

Danozeman - 11/6/03 at 06:01 PM

I have the luego locost lower wishbones that are for the sierra hub which use the maxi bj.(the big hole with a small one either side)

macbrew - 13/6/03 at 06:09 PM

MK - good price, good service. Maxi ball joints I think. Cheapest aint always best.