Is anyone aware of a non-IRS rear axle that used a 4-on-4.5" rear axle other than Triumph?

If so, please post the source and rear track or hub-to-hub spec if you know it.

Thanks,

Doc,

4 x 4.5" (or 114.3 mm) is the standard pattern for smaller RWD Toyota's - eg Corolla's, Celica's, Corona's, etc etc etc. I believe the same pattern is also used by other Japanese makers eg Nissan, Mazda.

Depending on how much power you intend to put through it, I'd be looking for a late 70's/early 80's Celica (RA40, RA60 models).

Hope this helps,

Dominic
http://www.DIYSportsCar.org

MGA and MGB have this pattern.

Probably not common in the UK, but six cylinder Mustangs from 65-69 and six cylinder Falcons from 60-69 as well.

Carcentric,

This site lists wheel fitments for loads of cars, while it doesnt tell which are live axel and which not it should help...

http://www.tyresave.co.uk/fitment.html

or here:

http://www.hot.ee/rehviprof/Fitment%20chart1.htm

- Greg H