How have you all fixed your transmission tunnel top cover on (the one that needs to be removable for IVA)?
why does it need to be removable?
I have a full floor covering the bottom of the tunnel and IVA inspector will need to inspect pipes and wires going through.
ah, i see.
rivuts?
I was looking at them but wasn't sure if they work with a normal rivet gun or if i would need a new one?
You need to get a riv nut gun as well, I have velcro holding mine on
yeah its a special tool you need.
round headed (cross headed) self tapping screws?
I didnt think of velcro
quote:
Originally posted by speedyxjs
I didnt think of velcro![]()
Every kit builder needs one - mine is made by silverline cost about £13 - similar to this ebay one... You can spend a lot more on them, but I
didn't and it has worked fine for me.
http://cgi.ebay.co.uk/RIVNUT-INSERT-TOOL-GOOD-QUALITY-HAND-WCC-633942-500_W0QQitemZ270345936479QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item3ef
1df9e5f&_trksid=p3286.c0.m14&_trkparms=72%3A1688|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50