Im after some thing to cover some of the interior side panels/tunnel, somthing simple, cheap but relatively hard wearing. Id like something in a satin/mat black but with some texture thats NOT carbon fibre style!
Somthing similar to the pinseal (i think its called) pattern below but on a roll and thinner.
1mm Black ABS Pinseal/Textured Sheet 297x420mm A3 New | eBay

any ideas?

Google is your friend:

http://www.plastock.co.uk/Sheet/ABS/Pinseal/Black-c384/

or here:

http://www.plasticstockist.com/ABS-Sheet.aspx

Cheers, but these seem to be rigid sheets of plastic rather than self adhesive sheets. Im after something a litte more flexible.

doh just realised that! looks like google isnt a friend anymore!

It might just not exist - or im just searching for the wrong keywords- who knows!

why not just use the plastic sheet rather than cover something else?

Its to cover ally side and tunnel panels and only in cerain areas, the plastic alone would be to thin and flimsy on the tunnel, and not practical to do the side panels.

You can get flock covered polystyrene as used for vac forming tomake those jewellery box inserts, might feel a bit hairy though!
atb
Mike

Halfords had treadplate vinyl in the clearance aqrea recently. A bit tacky chav looking though.

Yeah, defo a bit too industrial looking to, I was thinking of something like that for the floors, but wanted something more subtle for the side panels.

Anything here? http://www.thevinylcorporation.co.uk/
or Di-Noc architectural http://www.idsfinishes.com/gallery/ you can get samples here.

I managed to get some leatherette type material but with uniform pattern rather than a leather look finish to cover the center tunnel. Not self adhesive but Ok with a tin of contact adhesive.

Might be worth having a look at your local material shop to see what they have.

[Edited on 13/1/12 by cerbera]