This might sound daft, but has anyone got any idea how you would go about fitting this?:



It's pre-drilled abd the holes look similar to those on a single seater style hub adapter but upside-down.

Can't find anything online i.e Kart bosses.

Any ideas?

Ta

I ordered a Wilwood quick release hub from the US, and aftre just a little fileing my kart wheel bolted straight on. The wilwood hubs comes with a hex drive stub, that you weld on.

link here to hub from summit racing at 25 USD - about 15 UKP.

Cheers

Fred W B



dash front


[Edited on 20/4/06 by Fred W B]

[Edited on 20/4/06 by Fred W B]

I would look at a Momo hub and redrill the wheel if needed then make a nice shiny plate to cover the old holes.