Morning all,

Although my build has slowed right down it's giving me the opportunity to look at the minor details that make the car individual. I've recently designed a log for my MiniMojo and had a sample stitched onto felt, the end product will be on my headrests. I've also designed a stainless steel binical with a similar logo, once a sample is laser cut I will photograph it and post the results.

Would anyone be interested in getting something similar? utilising my design and CAD skills? Is a market for this type of thing.

What do you all think?

Regards

Patrick

I would be interested in a stainless logo for my grill.

YQUSTA

I'd be happy to assist, do you have any ideas?

I certainly do




or




not sure whch would be best yet though and sorry the second one is so small

I would not need the grid effect in the first pic, i was thinking along the lines of a solid back ground with the "S" cut out and with the second pic i was thinking about just using the black and the rest would be cut out.

Thanks in advance and let me know if its possible

YQUSTA

either is possible!
Either embroidered or laser cut in steel
I'd just need to know the size you want/where you're going to use it?
More details the better!

here's what I've had done as a sample.
I will photograph the steel plates I'm having Lasered soon.
Rescued attachment logo.jpg

I was thinking of having 1 of them on the grill

size maybe 4 inch diameter

im leaning more on the side of the second 1 for best air flow

how much with p&p do you recon?

Thanks

YQUSTA

Do you already have a grill?

Do you want a grill/logo in one piece?
If so I'd need exact sizes!

if not I'll at least need an idea of fixing details.

Please see the grill design for my mini, you'll get the idea of what I'm talking about.

How much do you want to spend?
Rescued attachment mini grill.jpg

All ready have a grill its an MK Indy and the grill is woven mesh.




for fixing it could have a bolt on the rear of the design then i can put a washer and bolt on it to hold in place?

I will check the hole size of the grill for you when the rain stops

spend as little as possible

Thanks for the help

YQUSTA

Please see attached word doc, either of these any good?

Super

I prefer the left hand 1

I also checked the gril weave and its 5mm diamond's

I like your idea for having 2 mounting points also

let me know how much and i'll forward you my delivery details

YQUSTA