hi all
is the gts de-dion set full length drive shafts or shortened ones?

cheers paul

Uses standard driveshafts. Unless you specifically buy the narrower one used for the challenger.

David

cheers for that
do you know the spacing between the trailing arms?
is it more or the same as book?

Same as book as far as I can remember.

The GTS chassis is essentially a book chassis, slightly modded behind the rear bulkhead to allow more clearance for the de dion on full droop.

David

my gts dedion fitted my book chassis pickup points for the trailing arms, i fitted the panhard rod mount when i already had the axle but its not hard to position it once in situ.

Ned.