Board logo

FS: Mac#1 ZR parts, possible fitment to other locosts?
livelee - 26/1/09 at 08:15 PM

Rear wings sold.

Rear upper and lower wishbones:





Roll bar:




Rear end body work: (lights not included)






Scuttle sold.

If you're interested then make me a sensible offer. If you require any more photos, details, measurements etc then please let me know.

Thanks

Dan

[Edited on 26/1/09 by livelee]

[Edited on 27/1/09 by livelee]

[Edited on 7/2/09 by livelee]

KAMBO - 26/1/09 at 08:20 PM

can you give me some roll bar dimensions
??

fatfranky - 26/1/09 at 08:21 PM

Will the scuttle fit an indy?

If so, how much inc delivery

Many thanks

Frank

livelee - 26/1/09 at 08:25 PM

quote:
Originally posted by KAMBO
can you give me some roll bar dimensions
??


Yes. I will measure when i'm back in thw workshop.

quote:
Originally posted by fatfranky
Will the scuttle fit an indy?

If so, how much inc delivery

Many thanks

Frank


Possibly, I know they are the same width. You'll have to check for definite. I really don't know what to ask for the parts. I would imagine delivery will be in the region of £15 for each item with a courier. Make me an offer I can't refuse :-)

Dan

Oldpc - 26/1/09 at 09:29 PM

u2u sent

cjtheman - 26/1/09 at 09:45 PM

u2u rear arches

livelee - 26/1/09 at 09:55 PM

Blimey, Lots of interest already. I did not expect this.

Scuttle, pending payment, sold, sorry.

Thanks

Dan

[Edited on 27/1/09 by livelee]

carpmart - 26/1/09 at 10:07 PM

Great looking workshop you have there....and some interesting projects in the background!

Please can you let me know how much delivered (MK postcode) for the wishbones please!

Thanks!

livelee - 26/1/09 at 10:10 PM

Cheers.

The R1 MK is my cousins and the sprite is my uncles. The one in the middle is the remains of the Mac.

u2u regarding the bones.

livelee - 27/1/09 at 05:21 PM

quote:
Originally posted by KAMBO
can you give me some roll bar dimensions
??


Ok, all measurements in mm.

The "feet" plates are 118w x 125d.

The roll bar is 335h to the bottom of the bar and 385h to the top of the bar.

The bar is 160 in diameter.

The bar is 1060w to the outside edges of the feet.

The bar is 820w between the inside edges of the feet.

HTH

Dan

[Edited on 27/1/09 by livelee]

KAMBO - 27/1/09 at 06:03 PM

bugger it's too small... i'll have to make one

livelee - 7/2/09 at 05:21 PM

Bump. Rear end going to the dump with the remains in a week.