Hi,
Brand new unsused quick release steering boss, Has 6 bolt fixing so can take momo, omp wheels etc.
Hex 3/4 slug cost 39.50 plus P&P from rally design.
32 delivered please.
cheers

could you supply a pic please

cant seem to find it on RD website

could you confirm it fits sierra column and

takes a mountney wheel?


first dibs if its suitable please...



is paypal ok

[Edited on 13/4/09 by gavin174]

[Edited on 13/4/09 by gavin174]

sorry not got the hub with me as it at my workshop.
Its a 6 bolt pattern on the hub so some of the mountney wheels would fit.
And yeah it should weld onto your sierra shaft.
cheers again

Careful as the most common mountney's have a far larger PCD on the 6 holes than Momo's etc.

Feeling helpful, therefore linky:

http://www.rallydesign.co.uk/product_info.php?cPath=82_1812_906&products_id=7342

Couldn't find the 6 hole variant but this isn't far off...

do you know what pcd the holes are

are they 100mm for traditional

or 70mm for m type

cheers gavin

would say 100mm 6 bolt pattern but will grab it 2mo to measure for you.
thanks for the interest

Just checked at the PCD is 70mm.
so this will fit mountney M range etc

yes please if i could have it.....

please let me know how you want payment

thanks gavin