Where I havent put a price make me an offer, remember to include P&P
Image deleted by owner
A selection of trim bits and pieces. The large battery terminal covers work well to cover the top balljoint at the front. The gland seals are good for covering track rod extensions. Small red batt cover sold
Image deleted by owner
Pinto auxiliary belt, brand new.
Pinto cam pulley (also have a bolt and key in one of the other pics to suit), clean and ready to fit, complete with back plate.
Type 9 gear lever, slightly shortened otherwise standard from what I can see.
Fiesta engine mounts, commonly used in locosts. Were a tad soft for my pinto, but would be ok for a zetec or something lighter.
Image deleted by owner
Bosch pinto dizzy cap. Used but in good condition.
Pinto 88deg thermostat. Fitted to mine for about 500miles.
Complete set of pinto HT leads inc coil lead. 8mm high performance silicone.
Set of almost new APR6FS pinto spark plugs. Been run for a few mins to try and diagnose my ignition probs.
Image deleted by owner
Type 9 gearbox layshafts. 1 brand new, other 2 used but no measurable wear. I also have a complete gear set for a type 9 which is in good condition.
Pinto oil pressure switch
Pinto water temp sender (std)
Pinto valve springs. Standard, low mileage.
Belkin Serial 9 pin male to female extension type cable.
Image deleted by owner
Dash 3 braided hose fittings. All M10x1 thread. 2 male convex seat and 2 female concave seat. SVA OK.
Pinto fuel pump drive pin
Accelerator cable adaptor for twin cable applications. Block fits on top of accelerator pedal to convert to twin cables. Sold
Bolt and key for cam pulley.
Set of new lay gear bearings for type 9 box.
Seal for speedo output on T9.
Image deleted by owner
Pair of cortina M16 calipers. Seen better days to be honest and one is seized. Could be useful to rebuild or as an exchange set for someone to avoid the surcharge?
Image deleted by owner
Various type 9 parts. Let me know what you need and I'll see if I have it. Big stuff is collection only, but small bits I can post.
3?! sierra rear hubs for drum brakes.
Like I said, make us an offer if there is anything you want/need.
Got a load more SVA stuff to put up, but Matts got it all at the moment!
David
[Edited on 19/4/09 by flak monkey]
[Edited on 19/4/09 by flak monkey]
You can have all the SVA rubbish back now i have fitted the new stuff. 