I'm 'thinking' of selling... due to a few reasons I don't want to go into.

Lightweight chassis powdercoated
Alloy Panels
rear roll hoop with cross brace to the footwell
Live axle(less weight) fully rebuilt
All new brakes/lines/pedal box/master cylinder etc
13" minilites with avon 048 road/race tyres
AVO adjustable suspension
2.4 turn quick rack
MNR reverse box(almost zero loss)
Bailey morris propshafts both with shock tubes
Full power Hayabusa motor(with v5) 9000miles fully checked over and in great condition
Extreme engines billet sump
extreme engines baffle plate's(sump and gearbox)
Prop shaft adapter
Full semi lightweight spyder bodywork(gelcoat blue)
4-2-1 custom manifold system(stainless)
2 GRP seats with carbon look head rest part
custom alloy fuel tank baffled with sump(fully pressure tested and CE stamped, not a cheap unsafe one
all new wiring loom
Hayabusa loom

Everything bar the motor/axle is new, it'd cost 14k to get everything together, all you need is a dash I think.

£7.5k. You couldn't build any new car to the same spec for that I think.

[Edited on 8/12/09 by franky]

How much of the is actually built ? Is it just a pile of bits?

Its not a pile of bits, Rolling chassis with all brakes/suspension etc fitted, the fuel tank/boot floor is fitted, all the alloy panels are fitted bar the top and one side of the transmission tunnel, the back of the car is fully wired too.

Props and reverse box are fitted too. Interested?

[Edited on 10/12/09 by franky]

Hi Franky,

Couple of questions

1) what is the ratio for the live axle?
2) Is rear axle fitted with LSD?
3) Was this a chassis supplied by fisher/ Kitcar workshop/BGH?
4) What brakes have you fitted?
5) Would you be willing to sell without engine and associated bits (ecu, manifold etc)

Cheers

Paul

1) what is the ratio for the live axle?

I've got a 3.89 fitted and a spare 3.54 to fit

2) Is rear axle fitted with LSD?

Nope
3) Was this a chassis supplied by fisher/ Kitcar workshop/BGH?

Supplied by the kit car workshop
4) What brakes have you fitted?

Its got new sierra calipers fitted as when I drove a couple of furys bar the weight saving I had better feeling from them over the lightweight types.

5) Would you be willing to sell without engine and associated bits (ecu, manifold etc)

That could be an option.

will consider selling in bits if the main items go.

yhu2u

quote:

---

Originally posted by MK9R
yhu2u

---

just to add this is the bodywork without a screen.

Some pictures would be useful ?

the 12 motor is gone and now its got a hayabusa lump that doesn't need the remote filter set-up.