Board logo

Few bits + 4agze motor for sale
oldtimer - 2/3/10 at 05:35 PM

Sierra uprights with mushrooms, not offset, £20 picked up Bath. need a good clean.

Sierra calipers, vented, need cleaning, free for pick up.

Escort caliper, blah blah need cleaning, free for pick up Bath.

4agze motor - the supercharged 1.6 Toyota one. Bought off here for fun - not fitted and in the way, includes supercharger, coil packs, injection, sensors, exhaust manifold. From Raw originally. £400 picked up, no offers thanks.

Pics in photo folder under 'oldtimer' (at the bottom)

Cheers


Steve Hignett - 2/3/10 at 09:19 PM

I don't have the money (or a car) for the engine at the moment, but do you know:

What sort of power the 4agze puts out?
What gearbox goes straight to it (if not, what adapter is needed)?
Is it a similar size to? (zetec, kent, VX etc)

Thanks,
Steve


NigeEss - 2/3/10 at 10:36 PM

160bhp and will fit onto the box from the AE86 Corolla (if you can find one).
Adaptors available for type 9. Quite a compact motor, shade bigger than a xflow
but the supercharger bloats it out a bit.

[Edited on 2/3/10 by NigeEss]


oldtimer - 3/3/10 at 01:41 AM

They put out the same bhp as a 20v blacktop 4age but about 50% more torque. Type 9 fits with an aftermarket bell houseing - from Raw and others.


fathead - 3/3/10 at 09:48 AM

U2U sent re calipers and uprights.

Cheers

Steve


TimC - 3/3/10 at 11:56 AM

There is a T50 gearbox on eBay but its nearly £400. It's meant to be a really nice unit to use - although I have no direct experience.


bimbleuk - 3/3/10 at 01:13 PM

quote:
Originally posted by oldtimer
They put out the same bhp as a 20v blacktop 4age but about 50% more torque. Type 9 fits with an aftermarket bell houseing - from Raw and others.


Plus you can bump the power up to a reasonable 180BHP with a larger crank pulley.


Bass1st - 8/3/10 at 12:47 AM

I am running a 4age at the moment - will the engine fit the same mounts, bell housing etc?


bimbleuk - 8/3/10 at 08:02 AM

quote:
Originally posted by Bass1st
I am running a 4age at the moment - will the engine fit the same mounts, bell housing etc?


They all use the same 3 rib or 7 rib block so bolting it in won't be a problem. You might want to check clearances first though as the supercharger gubbins do add to the dimensions.

[Edited on 8-3-10 by bimbleuk]


nasty - 9/3/10 at 10:17 PM

U2U re engine sent last Sunday night.


oldtimer - 16/5/10 at 01:26 PM

All sold thanks