Board logo

1999 Ford Scorpio Ultima (2.9 Cosworth Engined)
colt_mivec - 8/7/10 at 01:32 PM

We have a Ford Scorpio Ultima with a 2.9 V6 Cosworth Engine,Autobox

MOT & Tax ran out in Feb 2010 but was used as a runaround

We have owned the car since 2002

The car is available for parts or for sale as a whole

Please call me on 07715 763819 if anyone is interested

All parts can be removed and couriered out to you or collected




[Edited on 8/7/10 by colt_mivec]

big_wasa - 8/7/10 at 01:53 PM

Thats a lot of metal to shift

What sort of money are you looking for ?

cheers

[Edited on 8/7/10 by big_wasa]

mangogrooveworkshop - 8/7/10 at 02:04 PM

what price for the whole unit
I would split it with another builder as i only require the engine/ ancilleries..wires ect

colt_mivec - 8/7/10 at 02:46 PM

We are open to offers

colt_mivec - 9/7/10 at 02:43 PM

Car needs to go as its a shame for it to sit here

ChrisW - 10/7/10 at 09:42 AM

Where in the country is it?

colt_mivec - 10/7/10 at 01:33 PM

Scunthorpe,North Lincolnshire but i have the ability to deliver for a small fee

colt_mivec - 13/7/10 at 01:03 PM

BUMP BUMP BUMP

colt_mivec - 21/7/10 at 06:52 PM

BUMP,Not looking for big money

colt_mivec - 17/8/10 at 03:25 PM

Anyone before the scrap grab takes it

marcjagman - 17/8/10 at 09:22 PM

£150?

colt_mivec - 20/8/10 at 04:24 PM

No thanks,Scrap is at £170 Per Ton and this old girl isnt a feather weight

interestedparty - 20/8/10 at 05:00 PM

It would probably be a good idea to just say how much you want.

marcjagman - 22/8/10 at 09:06 PM

Wish I could get £170/tonne for scrap, lucky tp get £100 around here

JoelP - 22/8/10 at 09:13 PM

quote:
Originally posted by marcjagman
Wish I could get £170/tonne for scrap, lucky tp get £100 around here


£95 in leeds at last check.

marcjagman - 24/8/10 at 09:03 PM

So as I've made an offer how about a counter offer?

kensprin - 24/8/10 at 09:41 PM

I just bought an ultima cossy for £200 80k miles on it. Im Stripping it down now for the engine eec-v and engine bay loom although the wiring loom is prone to heat damage. on these. Now I have a nightmare with the seperate PATS module.

marcjagman - 25/8/10 at 08:46 PM

So how much you looking for then?

FlansS14 - 26/8/10 at 07:53 PM

Is this not the worse advert EVER!

"yes you can buy the car but I'm not gonna give you a price"

With sales techniques like that you should get ur ass on Dragons Den!!

McLannahan - 26/8/10 at 08:22 PM

quote:
Originally posted by FlansS14
Is this not the worse advert EVER!

"yes you can buy the car but I'm not gonna give you a price"

With sales techniques like that you should get ur ass on Dragons Den!!


Adding petrol to this fire Colt Mivec messed me about so so much with the sale of one of my cars, money and time wasted - left me very bitter!

It would seem that Colt_Mivec seems to miss both sides of the advertisement process....

Sorry for dragging that up Colt Mivec - never did receive an apology from you!

marcjagman - 30/8/10 at 08:41 PM

So is this car still for sale or what? That engine would look ever so nice under the bonnet of my Sierra who I have christened Sally.

colt_mivec - 6/9/10 at 06:55 PM

Still for sale

colt_mivec - 6/9/10 at 06:58 PM

quote:
Originally posted by McLannahan
quote:
Originally posted by FlansS14
Is this not the worse advert EVER!

"yes you can buy the car but I'm not gonna give you a price"

With sales techniques like that you should get ur ass on Dragons Den!!


Adding petrol to this fire Colt Mivec messed me about so so much with the sale of one of my cars, money and time wasted - left me very bitter!

It would seem that Colt_Mivec seems to miss both sides of the advertisement process....

Sorry for dragging that up Colt Mivec - never did receive an apology from you!


I have sent you a U2U regarding this sale of one of your cars

My number is in there if you require the apology but i cannot honestly remember how this was left it was that long ago and i would by no means of promised something and not gone through with it

colt_mivec - 6/9/10 at 06:59 PM

quote:
Originally posted by McLannahan
quote:
Originally posted by FlansS14
Is this not the worse advert EVER!

"yes you can buy the car but I'm not gonna give you a price"

With sales techniques like that you should get ur ass on Dragons Den!!


Adding petrol to this fire Colt Mivec messed me about so so much with the sale of one of my cars, money and time wasted - left me very bitter!

It would seem that Colt_Mivec seems to miss both sides of the advertisement process....

Sorry for dragging that up Colt Mivec - never did receive an apology from you!


If you still have this Golf ill buy it just to show you im 100%

interestedparty - 6/9/10 at 09:00 PM

quote:
Originally posted by colt_mivec
Still for sale


How much?

marcjagman - 6/9/10 at 09:27 PM

Money burning holes in my pockets.

colt_mivec - 6/9/10 at 10:41 PM

PM me if your interested

colt_mivec - 10/9/10 at 10:40 PM

Still waiting for a U2U from the guys who are interested to talk money

Im sure it will sail an MOT if you needed to drive it home this can be done no problem

colt_mivec - 30/11/10 at 01:28 PM

BUMP £500

prawnabie - 30/11/10 at 08:31 PM

colt_mivec - 30/11/10 at 08:50 PM

quote:
Originally posted by prawnabie


What are you so shocked about?

colt_mivec - 6/12/10 at 03:37 PM

Any takers? Offers welcome and ill make a site donation

marcjagman - 6/12/10 at 05:10 PM

Just bought one on ebay with T+T for £360. Will take for £150 as a spares car though?

colt_mivec - 7/12/10 at 02:59 PM

I can get £150 per ton for scrap so thats where its going

owelly - 7/12/10 at 04:31 PM

£150 per tonnes of clean scrap. That's scrap metal, not all the non-scrap that is attached to the metal! If you're getting £150 for a scrap car, get on to ebay, buy up all the non-runners and sell them to your scrappy! You can be retired by Christmas!
Good luck.

marcjagman - 7/12/10 at 05:12 PM

Weighs 1.4 ton so thats £210. I'll take it for that.

colt_mivec - 17/12/10 at 01:51 PM

We own a fabrication shop so get a better price for scrap than the man of the street due to the volume we get in waste from sheet metal

£400-£500

Irony - 17/12/10 at 04:00 PM

I can't believe this car has not sold. If I had the slightest reason to buy it I would but I don't. If I had the time to strip it and sell it I would. If I haven't spent ££££ on my v8 I would have bought it and bunged it in the kitcar. Why don't people want it?

scootz - 17/12/10 at 07:26 PM

quote:
Originally posted by Irony
I can't believe this car has not sold. If I had the slightest reason to buy it I would but I don't. If I had the time to strip it and sell it I would. If I haven't spent ££££ on my v8 I would have bought it and bunged it in the kitcar. Why don't people want it?


Probably because, like you, they don't have the slightest reason to buy it!

speedyxjs - 18/12/10 at 10:46 AM

quote:
Originally posted by scootz
quote:
Originally posted by Irony
I can't believe this car has not sold. If I had the slightest reason to buy it I would but I don't. If I had the time to strip it and sell it I would. If I haven't spent ££££ on my v8 I would have bought it and bunged it in the kitcar. Why don't people want it?


Probably because, like you, they don't have the slightest reason to buy it!


and £500 is alot of money for a car with no t&t.

colt_mivec - 21/12/10 at 02:22 PM

If i was to pull the engine,wiring loom,gearbox and diff out it would be worth easily £500 and £100 for the rest in scrap

The wheels have good bridgestone potenza tyres all round which would be ideal for a kit car etc.

Its just sat in the yard here waiting for a slack moment to weigh it in or sell it...Its stood since Feb but has been ran around the village to keep it all free every week

prawnabie - 21/12/10 at 03:07 PM

Then you would be selling it for a different purpose, a car that has to be stripped or is to be used as a barge is worth far less the same car in ready to fit donor parts.

I would weigh it in as no one has come forward so far for it.

marcjagman - 21/12/10 at 06:07 PM

quote:
Originally posted by prawnabie
Then you would be selling it for a different purpose, a car that has to be stripped or is to be used as a barge is worth far less the same car in ready to fit donor parts.

I would weigh it in as no one has come forward so far for it.


I want it, and made an offer but he just wants too much.

colt_mivec - 21/12/10 at 07:01 PM

It'll go on Ebay and if nobody wants it then scrap

colt_mivec - 21/12/10 at 07:01 PM

Only in Scunthorpe aswell so not far away if you wanted to view it and i did say £400-£500 would buy it

[Edited on 21/12/10 by colt_mivec]

Steve Hignett - 21/12/10 at 10:15 PM

I can't believe that I am the only person that finds this rather amusing?

McLannahan - 21/12/10 at 10:26 PM

quote:
Originally posted by Steve Hignett
I can't believe that I am the only person that finds this rather amusing?


You're not the only one Pants...

colt_mivec - 22/12/10 at 03:33 PM

seems a shame to bale it so offered it here first

Amusing in what way? For someone to break it they'd double there money

marcjagman - 22/12/10 at 03:55 PM

quote:
Originally posted by colt_mivec
It'll go on Ebay and if nobody wants it then scrap


Is it on yet?

Lozer49 - 22/12/10 at 10:09 PM

If you wanted to strip it i would buy the rolling shell, or if someone wanted to buy it to strip i would buy the shell at scrap price. Im in manchester and could collect it from scunthorpe. thanks

Doctor Derek Doctors - 23/12/10 at 01:01 PM

quote:
Originally posted by McLannahan
quote:
Originally posted by Steve Hignett
I can't believe that I am the only person that finds this rather amusing?


You're not the only one Pants...


It's pretty funny, considering a mate of mine recently bought a Scorpio 2.9 with tax and test for £150.

speedyxjs - 23/12/10 at 01:11 PM

quote:
Originally posted by Steve Hignett
I can't believe that I am the only person that finds this rather amusing?


I think most of us do