More stuff to go, prices include post.


1

From top left-
Narrow band lambda sensor, 4wire. £10
Sticky backed reflectors £5
Phormula interface cable £10
Mintex powerlite Smart brake pads. Used but hardly any wear. £10
Type 9 input shaft, used for clutch alignment £10
NGK BR7EFS spark plugs. Brand new, 1 step colder than standard for Duratec £10
Large LCB sticker. £8
Mk1 MR2 headlight retractor relay
Side repeaters - stick on with mini timer connection £10
T9 plastic gear lever saddle £5
Rotrex pulley, 90mm. £45
Duratec crank pulley £15
Noise filters for megasquirt £5 each
Megasquirt air temp sensor and bracket £10
New Duratec crank position sensor and alignment tool £25
VA recirculating valve £7
Duratec water temp sensor connector £5
Oil filter and EGR gaskets for duratec £5


2

Black exhaust wrap - few metres, and 3 stainless ties £7.50
Various rubber covers £SOLD
Packet of various sized nut covers £SOLD
1 new poly bush £5
Std pinto alternator pulley, key, nut etc (in bag) £7.50
Gasket (not sure what its for)
Pinto manifold water outlet connector £5
Zetec etc coil connector £5
M14 track rod end lock nuts (escort and sierra rack) £4
Brake liht test switch £5
Change over switch £4
On-Off-On switch £4
New Cortina hub dust caps (no longer avail from Ford) £15
Type 9 to pinto support bracket £7.50
8 1/2" longer wheel studs (ford) £12.50
ECU comms lead (suit MS, Omex etc etc) £7.50

[Edited on 7/11/10 by flak monkey]

input shaft for me please....

please let me know payment details

You have u2u ref the air temp sensor and comms cable!

Cheers

Adrian

[Edited on 7/11/10 by adrianreeve]

All the rubber and nut covers please.

how much exhaust wrap is there? will there be enough to do the 4 headers inside the engine bay?

quote:

---

Originally posted by daniel mason
how much exhaust wrap is there? will there be enough to do the 4 headers inside the engine bay?

---

U2U re brake pads

I'll take the wheel studs please. u2u coming your way.

Bump

Studs, pads, serial lead, temp sensor, and covers sold. Everything else available.

I'll have the pair of MS noise filters please.

did you receive payment for the input shaft?

quote:

---

Originally posted by gavin174
did you receive payment for the input shaft?

---

Bump

Hi,

I will take the Zetec etc coil connector if still available. You have U2U.

Raymond