Board logo

Sierra Donor kit/parts - free to collect
auroan - 4/1/11 at 12:00 PM

My kitcar build is now changing to a "daily driver conversion to track car project" so my sierra donor parts are up for grabs. I'm open to sensible offers and have the following for collection;

1.8 CVH engine (including all ancils, ie starter motor, alternator etc) but no engine loom.
type 9 gearbox with lever
Rear Diff
Front uprights

The above are at my place in York. I still have the shell at my grandparents in Bradford which still has attached;

Propshaft
Rear drive shafts
Full steering column
clocks
5 wheels and tyres
+ everything else apart from interior.

I still have the V5 as well. When I picked up the car, it had tax and MOT and I drove it for a good 500 miles with no issues.

I'd rather it go to someone on here rather than on ebay. I'm not after silly money either.

There is no value to me in the stuff so it's all avail for free if you can collect the York stuff in one go.

The shell in Bradford may be fun to collect and if you want the V5 you'd need to take the shell as wheel.

[Edited on 5/1/11 by auroan]

[Edited on 5/1/11 by auroan]

Ben_Copeland - 4/1/11 at 02:09 PM

Handbrake? with switch and cable rod?

auroan - 4/1/11 at 02:21 PM

Still in the shell (I think), can get it for you at the weekend .....

Ben_Copeland - 4/1/11 at 07:50 PM

Yes please, whats the damage with P&P...

Just to confirm, i need handbrake, switch, plug for switch, link bar to cables.

Thanks

stuleah - 4/1/11 at 10:56 PM

Do you still have the uprights u2u sent

auroan - 5/1/11 at 03:54 PM

u2u replied.

theduck - 5/1/11 at 07:41 PM

u2u sent

auroan - 5/1/11 at 07:52 PM

Replied

arrow-engineering - 5/1/11 at 10:31 PM

u2u4u!

auroan - 6/1/11 at 10:57 PM

Engine and box now provisionally gone.

theduck - 7/1/11 at 07:55 PM

Sent you another U2U about the bits still available.

auroan - 8/1/11 at 04:18 PM

Rear diff
front uprights
propshaft
rear drive shafts

Have now gone.

Many thanks for collecting Stu/theduck, good to meet you and your other half.

auroan - 8/1/11 at 04:28 PM

quote:
Originally posted by Ben_Copeland
Yes please, whats the damage with P&P...

Just to confirm, i need handbrake, switch, plug for switch, link bar to cables.

Thanks


Affraid my father (nickname of "bodge it n scarper" seems to have had a go at the centre console with a big hammer and bent/broken the majority of bits for the handbrake. So it wouldn't be much use for you now.

Sorry.

joemotion - 8/1/11 at 06:44 PM

Do you still have the sensor for the steering wheel horn - think its called a slip ring finger?

auroan - 9/1/11 at 10:57 AM

Engine and box now gone. Many thanks for collecting Andy, good to meet you and your other half.

auroan - 9/1/11 at 10:58 AM

quote:
Originally posted by joemotion
Do you still have the sensor for the steering wheel horn - think its called a slip ring finger?


The column/wheel/pod are still in the shell complete

theduck - 10/1/11 at 10:14 PM

Cheers Danny, was good to meet you! Good luck with your new project!