Board logo

Roll bar
DH2 - 2/7/12 at 01:17 PM

Following an upgrade to a full cage, I have the roll bar from my Stylus for sale.






Overall height = 500mm.
Overall width = 930mm, width of hoop = 820mm, width between fitting plates on rear braces = 895mm.

Should fit all Stylus chassis without problem, and I suspect would fit a Fury chassis too. Could obviously be modified to fit any other vehicle - if you want some extra measuring to check, let me know.

In overall good condition, though some scratches to powder coating.

Open to sane offers...

DH2

DH2 - 28/8/12 at 01:47 PM

Still tripping over this in the garage, so, BTTT.

ChrisLeary - 28/8/12 at 02:07 PM

What sort of money are you after for it? And please don't say pounds!

I'll have a measure up later depending on price.

Cheers,

Chris

DH2 - 1/11/12 at 12:57 PM

BTTT, plus...

Adjustable panhard rod. Polybushed, though one of the bushes may benefit from replacement.



Open to sane offers.

DH2

DH2 - 16/11/12 at 02:52 PM

BTTT...

DH2 - 11/2/13 at 12:53 PM

Tidied the garage up yesterday, fell over these parts again...

Also have a pair of donor MX5 front uprights/hubs, in decent working order, need a clean up.

DH2

CRAIGR - 11/2/13 at 01:30 PM

Is the hood usable with the roll bar fitted ??

DH2 - 11/2/13 at 02:29 PM

quote:
Originally posted by CRAIGR
Is the hood usable with the roll bar fitted ??


The hood which was on my car, just about fitted, using the roll bar in place of the hood bars.

DH2 - 23/4/13 at 02:38 PM

I still have the roll bar and adjustable panhard rod for sale.

Also: MX5 handbrake lever, complete with plastics, in decent condition = £15 posted.





DH2