Custom made narrow bonnet off crossflow car in aluminium , will post up link for pictures tommorow , I am making a glassfibre one to suit my new engine install .

Crossflow 1600 711m BA block , of unknown modification , I can see ports have been done , was in car when I bought it , have heard running but cannot vouch for performance , possibly may need tappets adjusting , will throw in starter and alternator and brand new starter solenoid if required . £150

Aldon Automotive electronic distributor and coil to suit , as new £100 posted to you by courier .

Dellorto 40 carbs and manifold to suit crossflow , car was stood and would recommend a rebuild to be on the safe side , short manifold and comes with k&n filters and throttle cable to suit westfield modified escort pedal box £200 ono .

Westfield stainless crossflow exhaust manifold , good condition although no 4 has a crack on the weld and would need a spot of weld , easy repair . £40 posted by courier .

I am in Gloucestershire GL15 area , contact Julian 07971 264550 if you want the complete engine install may do a deal

Please note this is a personal sale an not related to my business .

Photo album

[Edited on 19/8/12 by aerodynamix]

Engine now sold subject to collection , carbs , dizzy and coil , exhaust and bonnet still available , open to offers before I put it on ebay for the vultures ...

Re the xflow exhaust, could you post a pic, ?

What is the bore size

And first dibs, if it seems suitable
regards

Steve

Hi Steve ,
I have already had a query as have also listed on wscc forum , I am awaiting to hear back but if that's no good you have 2nd on it if thats ok . Bore is 40mm on primaries and goes 4 into 1 and exit is 50mm . If you click on link in first post it will take you to photo album , there's now a picture on there .

Regards Julian

Thanks

I am certainly interested, and will measure the bore tomos after my night shift

regards

steve

Bonnet awaiting on reply to message
Engine collecting tommorow (tuesday)
Distributor and coil sold
Carbs on ebay at the moment , message me if interested and will remove
Manifold sold subject to payment

Cheers