Board logo

Fireblade 893 engine
kev super 6 - 20/4/13 at 08:56 PM

Hi All,
im removing the engine from my Fury tomorrow as ive just bought a 1000rr.

Fireblade 893cc plus all ancillarys inc exhaust and engine cradle, everything to drop into another car. £1300 ono

Accusump with all fixing brackets and fittings £250

kev super 6 - 29/4/13 at 06:30 PM

bump

renrut - 1/5/13 at 09:29 AM

Out of curiousity what is the power and torque on these like?

kev super 6 - 1/5/13 at 10:14 PM

These 893 Fireblade engines have great power for what they are, they just keep pulling right up to the rev limiter.
I got my Fury over 2yrs ago and all I have done is regular oil change, new plugs and got the carbs balanced, these engines are just bomb proof.
Depending on what power your after and what budget you have, if you have a big budget then go Hyabusa if not you will not go wrong with a Honda engine.

kev super 6 - 6/5/13 at 06:24 PM

Any offers ?

kev super 6 - 21/5/13 at 07:51 PM

Reduced to £1000, also has a billet sump. I also have a big bore 974 blade engine that needs rebuilding £100

Aaron_n_Sim - 21/5/13 at 08:01 PM

U2u sent thanks

kev super 6 - 25/5/13 at 04:02 AM

974 engine sold to Aaron.
Any offers for the 893 ?

tom bailey - 26/5/13 at 07:05 PM

u2u sent

Aaron_n_Sim - 4/6/13 at 12:31 PM

Cheers Kev, engine collected on way to Honda now to get some parts!

Aaron.

kev super 6 - 4/6/13 at 05:41 PM

Still have 893 engine....Any offers

kev super 6 - 4/6/13 at 08:47 PM

nice one Aaron, keep us posted on the rebuild,
hope everything is there that you need.

Aaron_n_Sim - 4/6/13 at 08:54 PM

Hi Kev,

Just gaskets and seals to replace spoke to Andy Bates today, he's remembers the engine, told me it had the orange casings and is going to sort a head gasket for me!
I'll keep you up to date as and when, I get bits done!

Thanks again hope you sell the other soon!

Aaron

kev super 6 - 19/6/13 at 09:52 PM

893 fireblade engine still for sale

Aaron_n_Sim - 20/6/13 at 09:31 AM

quote:
Originally posted by kev super 6
nice one Aaron, keep us posted on the rebuild,
hope everything is there that you need.


There was more than I needed, spares galore, I'd recommend you as someone to buy from

Got the seals from a eBay seller £50 cheaper than Honda and not made in china!

kev super 6 - 24/6/13 at 08:10 PM

Hi Aaron, Glad it was all there, as I say I got the lot together, so just sold it on as a job lot. Hows the build going.

Aaron_n_Sim - 24/6/13 at 08:17 PM

quote:
Originally posted by kev super 6
Hi Aaron, Glad it was all there, as I say I got the lot together, so just sold it on as a job lot. Hows the build going.


Just got to get a new head gasket, Andy Bates has to get it in from the states for me! He said its a monster of an engine he did the head too! My mate had the same done in his bike, it did 210mph still undecided as to whether I put it in my kit or my bike!

Cheers mate, it was a bargain! Hope the other engine sells for you soon!

Aaron