Roll Bar
Following an upgrade to a full cage, I have the roll bar from my Stylus for sale.
Overall height = 500mm.
Overall width = 930mm, width of hoop = 820mm, width between fitting plates on rear braces = 895mm.
Should fit all Stylus chassis without problem, and I suspect would fit a Fury chassis too. Could obviously be modified to fit any other vehicle - if you want some extra measuring to check, let me know.
In overall good condition, though some scratches to powder coating.
Open to sane offers above scrap weigh-in value.
MX-5 Handbrake Lever
Due to change of plan on what I am using. Complete with all plastics, and in good condition.
£15 posted.
Sierra Steering Column
Again, changed my plan to using an MX-5 donor part. Steering lock has been removed (due to no key), but stalk and cowl mounts remain. Otherwise complete and in good condition. Also lower link column with triangular and sliding joints.
£40 posted.
Sierra Column Bushes
Brand new QH replacement upper column bush kit.
Also a brand new 1" bore pillow block housed bearing to replace the OEM bearing (the OEM plastic triangular bush fits perfectly into this bearing).
£20 posted.
Caterham Tillett Seat Mount
A pair of genuine Caterham GRP seat mounts with fixings, removed from Tillett seat.
£15 posted.
More to follow once I get a bit further with my rebuild...
DH2
