Board logo

FS: Zetec Exhaust, Mikuni Flatslides, Gauges
kingster996 - 26/1/15 at 09:55 AM

I need to fund a new exhaust system, so will be selling off some spares and the exhaust I currently have.

I will post some more pics soon, but here's what I have:

MT75 Gearbox SOLD

Zetec 2.0 Exhaust system - over chassis bonnet exit, headers are wrapped and has a large s/s silencer. Will fit a Locost and I am awaiting confirmation that it was from Fisher originally - not sure what it is worth, but need to fund a new one to fit a wide bodied Westy (this one doesn't) - here's a pic of it on Dave's car before I bought his engine package apparently it is quiet enough too.



Mikuni RS38 Flatslides - will grab a pic later, but these are the same Suzuki GSXR1100 Mikuni RS Flatslides. 38mm. New. - they are in great condition and I'm looking for £400 - will post at cost

I also still have a full set of gauges still for sale - been 'sold' twice already! £120 posted to UK mainland.



Hopefully I'll soon have enough for a new exhaust system!

[Edited on 27/1/15 by kingster996]


daveb666 - 26/1/15 at 10:09 AM

Manifold and silencer are 100% Fisher. Exhaust is sub 98db!!


kingster996 - 26/1/15 at 10:22 AM

Cheers Dave - what a bummer that it doesn't fit! I guess your motor was further fwd and in a narrower chassis.


daveb666 - 26/1/15 at 10:25 AM

Which bit doesn't fit?


kingster996 - 26/1/15 at 10:42 AM

It won't attach to the head, the chassis gets in the way where the pipes bend over it. Needs to be a good 70mm longer at the manifold.

Wide body Westy, with larger tunnel allows Zetec to sit a lot further back in the chassis, so this means it is a lot wider where the exhaust exits.

[Edited on 26/1/15 by kingster996]


daveb666 - 26/1/15 at 11:01 AM

Wow, must be really wide then LOL. Could always chop and add some bits in if you get desperate, might work out cheaper in the long-run.


kingster996 - 26/1/15 at 11:24 AM

I reckon it's more to do with motor being further back, so the wedge shape of the chassis makes it even wider still.

I know a bloke who makes exhausts and he can probably fettle it - but wants the car there to line it up - and that's just not possible!

So, figure I can sell it and put dosh towards one designed for a Westie from the off.


kingster996 - 26/1/15 at 01:50 PM

I also have a Clutch (brand new) and a flywheel to suit a Zetec conversion - £60 the pair


JohnH - 26/1/15 at 03:58 PM

How much for the exhaust ?


kingster996 - 26/1/15 at 04:34 PM

I was thinking £275


kingster996 - 27/1/15 at 09:31 AM

Gearbox has been sold


kingster996 - 27/1/15 at 02:17 PM

Carbs on ebay - NOW SOLD

[Edited on 28/1/15 by kingster996]


kingster996 - 27/1/15 at 07:43 PM

Gauges Caterham, Kit Car, Locost Gauges, Speedo, Tacho, Water Temp, Oil Pressure, Fuel now


kingster996 - 28/1/15 at 12:59 PM

So - quick update.

Gearbox, Carbs, Clutch and Flywheel are all sold (assuming the respective buyers turn up today and hand over the dosh that is!)

Chris


kingster996 - 29/1/15 at 09:58 AM

Clocks now sold - so only the full 1.8/2.0 Zetec Fisher exhaust system left. Fits Locost chassis as per earlier pic - but won't fit wide body Westfield with MT75 tunnel.

[Edited on 29/1/15 by kingster996]


kingster996 - 25/2/15 at 09:51 PM

Exhaust sold.