The engine has been fully rebuilt including arp bolts polished and ported head ,piper high lift cams gsxr throttle bodies rwd sump it's done about 2k since rebuild and was fitted in a locost kit car ,it also comes with the rwd clutch to fit a type 9 gearbox it was rolling roaded and had 185 bhp before the head and cams were fitted. I bought it to install in my kitcar but I have decided to have a clearout
I also purchased a rwd bellhousing from yukspeed with clutch arm and release bearing. Its ready to go. fuelling is handled by the MBE ecu and bike throttle bodies. Should easily make 200 bhp. I have used the alternator. You will need alternator bracket and new alternator and crank pulley. About £50 from ebay.
I have a 4-1 manifold for this as well
£1600ono
[Edited on 11/7/15 by femster87]
[Edited on 11/7/15 by femster87]
[Edited on 12/7/15 by femster87]