Large items to be collected from Kent, smaller items can be posted at your expense.

English rear axle complete with 3J half-shafts, Wilwood handbrake calipers, Quaife ATB with 3.54 CWP Sold

Tillett Seats - pair Carbon B3.5 - average/worn condition Sold

Force Wheels - Red with well used sprint slicks. 8" fr 10" rear £1,000.00
Force Wheels - Black with used race slicks. 8" fr 10" Rear, £1,000.00
used F3 wet tyres to suit 8" & 10" rims £150

Quaife 60G Helical with gearstick, indicator & Ford Bellhousing. Sold
Engine with everything upto gearbox Sold

Front Willwood Midlite calipers/pads/discs £350.00

Penske 8300 : Penske 8300 2 Way suspension for Sylva Phoenix/Striker 12.5" front and rear dampers with 275 and 200 lb springs respectively. All valved to Meteor Specification." £2,250.00

Race Logic TCS - no wheel sensors. Sold
Race Technology Dash 2 Sold
Race Technology Video 4 - 4 camera £800.00

LED Headlights Sold
SPA Formula Mirrors Sold
Jenvey 45mm ITBs in red - one pair needs servicing Sold
Indycar Blade ARB Sold


Car will be broken up over the next few weeks. Any questions please ask, offers by PM please.

[Edited on 29/9/17 by jeffw]

LED Headlights
Tillet Seats
SPA Mirrors
Jenveys
Axle

All sold



[Edited on 28/9/17 by jeffw]

Am I still having the seats Jeff or have they gone to someone else?

Gearbox is sold.

Dash 2 is sold

TCS sold

Engine Spec

2lt Blacktop
Forged Rods/Pistons 10.5 : 1
Neil Roper Head with uprated springs & CNC Heads 300 Cams (New head)
Vernier Cam pullies
Cam Cover with two AN10 breathers to a catch tank
AN10 breather from crankcase
Raceline Sump
Raceline Water Rail
Very large Zero Exhaust (designed for this engine)
Remote Filter housing
Oil Cooler
Alloy Rad
Alloy Intercooler

TTS Rotrex Kit (all fitted & includes supercharger, oil rad, alternator all pipework for intlet/intercooler)
TTV 7 1/4 lightweight flywheel
Tilton 2 plate clutch
Hi Torque Starter to suit

Omex ITB (new)
660cc injectors
Modified GTiR Plenum on a Billet adaptor plate

Omex 600 ECU with map for this engine
Loom for ECU

Basically everything you will need to make 400-420BHP and 300 ft lb up to the bell housing for the transmission you choose.

As you imagine this has cost a fortune to get to this state.

[Edited on 29/9/17 by jeffw]

Engine Sold