Anyone got a saab type hydraulic clutch cylinder and release bearing? (round nose type?)

Cheers,
David

If you don't have any success on here and are stuck ring Alan/Simon at DCA in Upper Buckelbury - they dismantle all types of SAABs. Tel :01635 860086.
HTH.
Cheers, Pewe

Ebay's your friend...

I got one of these...

Thanks, can you measure the pcd of the holes and take some piccies of the mounting face for me please?

Also need to know the overall length compressed and open if poss?

TIA
David

Any chance you can measure me the bore too please?

ive got one of those fitted inbetween my vaux engine and type nine.

the bore in the centre is a bit too small to fit over the nose of the gearbox so you have to turn the nose down a little, i made my own spacer to move it out far enough to reach the clutch

Guys I have the dimensions and the CAD drawings of the spacer I machined and the modifications to the standard type 9 nose. The bad news is I think the files must be on my work machine and the cylinder is fitted and assembled box to engine.

I'll update tomorrow.

No worries, thanks very much

Just checking I have enough room for the cylinder and an adaptor/spacer plate thats all