the flange on the diff is a fine thread (M10x1.0) which is even harder to find....
cap heads (allen key) should be ok - at least I hope so, thats what came with my dax prop
[Edited on 27/1/10 by mcerd1]
Does anyone know where i might find the above? The only ones i can find on eBay are allen heads.
namrick ?
I can only find 8.8 on their site. do they do 12.9?
Doubt you will get 12.9 with anything other than torx or hex head, 10.9 on the other hand will be possible.
Darren
is this for your propshaft ?
the flange on the diff is a fine thread (M10x1.0) which is even harder to find....
cap heads (allen key) should be ok - at least I hope so, thats what came with my dax prop
[Edited on 27/1/10 by mcerd1]
Burton power do M10x1x18
These are marketed as propshaft bolts and interestingly are 10.9 (as can be seen from their picture).
I can't get the link to the item to work. It is www.burtonpower.com search on "propshaft bolt (M10x1x18)"
Matt
[Edited on 27/1/10 by matt_gsxr]
quote:
Originally posted by matt_gsxr
Burton power do M10x1x18
These are marketed as propshaft bolts and interestingly are 10.9 (as can be seen from their picture).
quote:
Originally posted by mcerd1
is this for your propshaft ?
the flange on the diff is a fine thread (M10x1.0) which is even harder to find....
I've just been through this but for a Sierra. I couldn't find anything but cap head in 12.9. There is hex head 10.9x1 fine thread on ebay from the stainlessbolts shop. Namrick do cap head bolts & nuts in 12.9 but standard course thread. Have you tried a Jag service centre?
quote:
Originally posted by speedyxjs
quote:
Originally posted by mcerd1
is this for your propshaft ?
the flange on the diff is a fine thread (M10x1.0) which is even harder to find....
Yeah but its a Jag diff.
for some reson I thought you had a sierra diff (with a jag engine & box of course)