Board logo

wtd: Rover v8 to manual lt77 bellhousing
dan_g8 - 28/3/10 at 02:52 PM

As above i am after a Rover v8 to manual lt77 bellhousing, ive been looking on the bay but havent seen very many come up.

Dan


wilkingj - 28/3/10 at 05:03 PM

There you go, cheap, as the going rate is £40-50. Downside its in Yorkshire.

Linky


dan_g8 - 28/3/10 at 05:16 PM

thanks, i spotted that on earlier unfortionatly it a bit far and the cheapest shipping quote that i have got is almost £50! ill keep watching it though as it may go for silly money.

Dan


Andy S - 28/3/10 at 07:20 PM

Going rate for a non 4x4 LT77 bellhousing is a fair bit more than £50 - more often than not around twice that much and may be missing clutch parts.

4x4 bellhousings of no use for a RWD

Andrew


dan_g8 - 29/3/10 at 08:13 PM

thanks for your reply andy, am i correct in thinking that the bellhousing that wilkingj suggested will be no good ? looks like its a 4x4

dan


Andy S - 29/3/10 at 09:29 PM

Utterly useless - it's about a foot longer than an SD1 which is the one you want and thats why it's at a tenner and not a ton.

Box wise any of the SD1 LT77's will do the job 2300/2600/3500 but only the one bellhousing - the 3500 SD1 and why they are getting expensive. The boxes are now the most expensive part of the install.

Andrew

quote:
Originally posted by dan_g8
thanks for your reply andy, am i correct in thinking that the bellhousing that wilkingj suggested will be no good ? looks like its a 4x4

dan