Board logo

Driveshaft CV boot wanted
Kriss - 15/11/10 at 01:41 PM

Found a small split on my drive shaft CV boot (diff output end) when swappings diffs yesterday.

Its a sierra 4x4 rear setup (bog standard 3.62 LSD) I have taped it up tight as a short term meassure but ideally want to replace in the next 100 or so miles if not sooner.

mookaloid - 15/11/10 at 02:34 PM

seems to be plenty on ebay

Kriss - 15/11/10 at 03:33 PM

its the diff end. how do I got abotu fitting without taking the lobro/CV joint apart?

omega0684 - 15/11/10 at 05:40 PM

quote:
Originally posted by Kriss
its the diff end. how do I got abotu fitting without taking the lobro/CV joint apart?


you can't,

1) unbolt CV from the diff,

2) take out the retaining circlip on the end of the driveshaft,

3) take off bearing of CV joint & old boot, Clean & slide on new boot.

4) replace cv joint and retaining clip,

5) bolt back on to diff.

simples!

HTH's

Alex