am working on the brakes this weekend and it seems i havent got hardly anything for my weekend work lol.

Has anyone got the push rods for the sierra master cylinder....

do i need anything else? i have a pedal box/ master cylinder/ with reservoir........

The master cylinder is the standard one for the drum rear brakes.....

cheers in advance.


dave

I had to make one fore mine as the standard one is too short (if I remember correctly) I cut the head off a long M8 bolt and filed the end to a curve. and sanded to make it smooth.

I;m about to do my hydraulic clutch on the ZZR14 and using some M8 threaded rod rounded as austin man said with a clevis from rally design will do the job

top tip put the bolt in a Pillar drill if you have one if not mount an electric one in a vice and apply the file to the bolt while it turns this is much quicker and gives a more even finish

[Edited on 19/11/10 by austin man]

Good tip
i've never thought about mountin the drill in the vice ( don't have a piller drill) simple but effective

Thanks all :-)

More fun tomorrow then :-)


Dave

emery cloth and oil is best to finish it of to a mirror like finish and it needs to be nice and rounded to reduce wear