As above need a rear hub for a mk1 mx5 please as it sustained damage during separation from driveshaft!!

Only need the hub but would take an upright if you can't be arsed removing the hub.

Cheers
steve

I've got one here with a dead bearing and a rusted-in lower bolt.........any use ?
Postage might kill it , but its free.............

Hi Claire. As long as the hub itself is ok that would be spot on. I've got a full new set of bearings ready to fit anyway.

If you let me know how much to post would paypal be ok?

Just back in from the shed.........
I'll check tomorrow , and let you know

Ta very much!

What happened to the hub during removing the shaft?

Just asking as I am struggling to get the shaft out of mine!

I happened to it!! Lost my rag trying to get the shaft out and took a chunk of it off.

I eventually got the shaft out after 3 days soaking in penetrating oil. Then in my 12 ton press at max pressure then a smack on the hub and it finally popped out.

Ok, mine been in the vice for about 5 weeks soaking in penetrating oil!!!

You've obviously got way more patience than me

Any joy Claire?