Board logo

WANTED: Zetec block
J90rdn - 15/9/17 at 06:15 AM

After a zetec block so I can mock up the cutting/fabrication required to fit an RX8 box into my Avon. Only need the block, and doesn't matter what state it's in. Prefer free obviously. If it has to be complete engine then don't mind as have a crane. Derby/Nottingham/Leicester/Coventry area.Thanks

Quinten - 15/9/17 at 07:54 AM

I have a complete 1.8 silvertop (minus crank) in the garage you can collect for free from Northampton

J90rdn - 15/9/17 at 08:15 AM

quote:
Originally posted by Quinten
I have a complete 1.8 silvertop (minus crank) in the garage you can collect for free from Northampton


That would be perfect. I assume the 1.8 silver top block would be identical to the 2.0 blacktop?

Can you pm me a postcode please?

Thanks

Quinten - 15/9/17 at 08:42 AM

I'm not sure what the exact differences are between Silvertop and Blacktop, but I'll pm you my postcode anyway

Shooter63 - 16/9/17 at 09:29 AM

I'm pretty sure that blacktop blocks have a slightly different block mount on one side.

Shooter