Any bolt on rear roll cages for a book chassis out there please? UK motorsport compliant tube spec, main hoop, rear brace tubes, diagonal plus a harness mounting tube. Similar to this, but with a horizontal upper harness mounting tube: https://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=IMG_6074.jpeg

Perhaps one from an old 750 Motor Club racer when they just ran rear roll cages or one from Aries Motorsport/STM.

Before I get the tape measure out, draw a design, get it made up in cut and bent kit form from Tube Bender and find someone in Scotland to weld it up.

Thanks
Mike

[Edited on 5/4/26 by Mike Wood]

[Edited on 5/4/26 by Mike Wood]

You may find the MK Indy one will fit as the Indy and book chassis was the same .

But please check before buying
Jacko

quote:

---

Originally posted by jacko
You may find the MK Indy one will fit as the Indy and book chassis was the same .

But please check before buying
Jacko

---

Shame you're not located a bit closer, else I'd have said to pop by and I'd bend one for you there and then..

quote:

---

Originally posted by Mike Wood
Any bolt on rear roll cages for a book chassis out there please? UK motorsport compliant tube spec, main hoop, rear brace tubes, diagonal plus a harness mounting tube. Similar to this, but with a horizontal upper harness mounting tube: https://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=IMG_6074.jpeg

Perhaps one from an old 750 Motor Club racer when they just ran rear roll cages or one from Aries Motorsport/STM.

Before I get the tape measure out, draw a design, get it made up in cut and bent kit form from Tube Bender and find someone in Scotland to weld it up.

Thanks
Mike

[Edited on 5/4/26 by Mike Wood]

[Edited on 5/4/26 by Mike Wood]

---

Thanks Steve, that’s a very kind thought. I might pop down the M6 if I draw a blank!

Best wishes
Mike