complete , dismantled or even a drawing

ideas, photos

even a clue as to what you guys used.

Building book locost, can get sierra parts without too many probs, or could use Mk2 escort master.

Too tight to buy a set from MK ( I'm Scottish )as they are 80 quids, or 8 rounds at the bar which ever mood you're in at the time .

Hope you can help.

Regards

Ewan

i used regular chassis tubes to make the pedals, 25x3mm flat to make folded brackets and the foot rests. Welded each to the chassis direct. A sierra master cylinder operated by a simple rod on a swivel, the throttle and clutch cables i just bodged on. Very easy really. Cost was a few hours and about a pound of metal!

This might be useful...

http://www.locostbuilders.co.uk/viewthread.php?tid=28649

I used the complete pedal assembly from my Escort donor mounted in a new pedal box fabricated from 2 mm thick steel. All geometry, pedal positions and pedal throws are the same as the Escort.
Pictures in my archive.

David

I have one for sale

Pedal box for sale

£50

I used escort master cylinder (and Servo.. big jessie) and made up pedals from escort ones. I can nip down and let you see them if u want dood...

Cheers John