HI im after about a foot of 16mm aluminium bar as i want to lathe some blanks for my injector holes, it doesnt have to be 16mm can be anything a bit bigger but will save some time if it is 16mm or so.
can anyone help me?

atb

rob

find your local "Metal Supermarket" very handy for odd bits, my nearest is coventry and they cut and posted 6 inshes of 3/4" ali bar for about a fiver inc p&p next day!

http://www.metalsupermarkets.com/MSC-storefinder.aspx?Region=UK&Map=UK

There's a few places selling on ebay, I got a foot of 19mm (3/4" for about £3 posted not too long ago

I have some 25mm dia. if that will do.
One piece is 150+mm long and the other is about 140mm long.
I do not know the grade of alloy, but they came out of the Bentley factory.
Send me a U2U if you want them.

hi i have 25mm bar, would like to have something bit smaller so its less waste and time, thanks for the offer though.

rob

ive got some of this tube at work 16mm outside 9mm inside hole already in u2u me your address and how much if you want some
adam

need it to be solid as its for blanks, thanks

There will probably be a stall at Newark selling offcuts if you are stuck